Your cart is currently empty..
AGFRC
Special Offer -Aluminum Case 15KG 0.07Sec Metal Gears HV 7.4V Brushless Digital STD Servo (A77BHM-B)
Special Offer -Aluminum Case 15KG 0.07Sec Metal Gears HV 7.4V Brushless Digital STD Servo for RC Car Airplane (A77BHM-B)
Note (Please read below tips carefully before order.)
1) Please kindly note that the special offer servos comes with a little flaw such as bad lasered, appearance defects, old version etc., but all the servos in the Special Offer list can work properly, 100% test before leaving our factory. If you care about the bad lasered, appearance defects, or old version etc., please do not order it.
2) As the servos in the Special Offer list is very low cost, so all the servos in this list will not accept refund. (Of course, we will ensure the servo is 100% work when you received)
3) The servos in the Special Offer list are not available to be programmable. If you would like to have the programmable one, please choose the servo in other list.
4) Refund or After Sales Service is not acceptable for the servos in the Special Offer list.
A77BHM-B is the fully aluminum case 25T standard digital servo perfectly to fit the use of RC Aircraft and car applications. Super shining CNC machining and color oxidation. Full aluminum CNC solid housing structure enhances heat dissipation. Capable of 7.4V HV operation voltage, 15kg-cm high torque and 0.07sec super speed for the model which required smaller torque but fast speed.
Feature
25T Spline Digital STD Servo
Fully CNC Aluminium Housing
Quick Response Brushless Motor
Durable Dual Ball Bearings
More Steadily Potentiometer Angle Sensor
High Precision Metal Gears
Specification
Model Name A77BHM-B
Operating Voltage: 6.0-7.4V
Operating speed: 0.085 sec/60° @ 6.0V
Operating speed: 0.070 sec/60° @ 7.4V
Stall Torque: 12 kg-cm (166 oz-in) @ 6.0V
Stall Torque: 15 kg-cm (208 oz-in) @ 7.4V
Gear: Steel
Motor: Brushless
Size: 40*20*37.5mm (1.57 x 0.78 x 1.46 in)
Weight: 79g
Connector Wire: JR 300mm / 22AWG

- Brand:
- AGFRC
- Iterm Name:
- A80BHMF
- Signal Mode:
- Digital
- Control System:
- Pulse width modulation control
- Refresh Rate:
- 333Hz
- Neutral Position:
- 1520uS
- Dead band:
- 2 uSec
- Operating Voltage:
- 4.8V-8.4V
- Operating Travel:
- 180°±10°
- Mechanical Angle:
- 220°
- Signal Range:
- 500 to 2500 uSec
- Angle Sensor:
- Potentiometer
- Temperature:
- -15C°~ +70C°
- Programmable:
- Yes
- Horn Gear Spline:
- 25T-φ5.96mm
- Bearing:
- Three Metal Ball Bearings
- Gear Material:
- Strength Steel
- Certification:
- CE,Rosh,FCC
- Product Size:
- 30*10*35.5mm(1.18*0.39*1.40 inch)
- Wire Guage:
- TYU 300mm / 22AWG
- Net Weight:
- 79g(0.2.78oz)
xxxxxx
Related Products
Your cart is currently empty.