45kg Programmable Brushless RC Servo for 1/8 RC Model (A81BHM)
不能存图片
AGFRC 45kg High Torque 0.085sec High Speed Programmable Digital Brushless Servo for 1/10 1/8 RC Crawler Buggy Truck (A81BHM)
Feature
Ultra light unique design
High performance standard digital servo
Strengthen high chrome steel shaft
Extra strong patent steel gears
Super strong three ball bearings
High efficiency bruhless motor
Programmable digital circuit
Full CNC Aluminium hulls and structure
Ideal for 1/10, 1/8 on road, off road, truck, plane, helicopter and engine etc
Stall Torque
- 28 kg-cm (375 oz-in) @ 4.8V
- 34 kg-cm (458 oz-in) @ 6.0V
- 39 kg-cm (528 oz-in) @ 7.4V
- 45 kg-cm (597 oz-in) @ 8.4V
Operating Speed
- 0.14sec/ 60° @ 4.8V
- 0.115sec/60° @ 6.0V
- 0.100sec/60° @ 7.4V
- 0.085sec/60° @ 8.4V
Package Included
Item 1
- 1 x A81BHM Progammable Brushless Servo
- 1 x 25T Metal Servo Horn
- 1 x Accessory Kit
Item 2
- 1 x A81BHM Progammable Brushless Servo
- 1 x AGF-SPV2 Servo Programmer
- 1 x 25T Metal Servo Horn
- 1 x Accessory Kit
- Note: Item 1 does not include the AGF-SPV2 servo programmer.
- Brand:
- AGFRC
- Iterm Name:
- A81BHM
- Signal Mode:
- Digital
- Control System:
- Pulse width modulation control
- Refresh Rate:
- 333Hz
- Neutral Position:
- 1520uS
- Dead band:
- 2 uSec
- Operating Voltage:
- 4.8V~8.4V
- Operating Travel:
- 180°±10°
- Mechanical Angle:
- 220°
- Signal Range:
- 500 to 2500 uSec
- Angle Sensor:
- Potentiometer
- Temperature:
- -15C°~ +70C°
- Motor Type:
- Brushless
- Motor Drive:
- FET Drive
- Horn Gear Spline:
- 25T-φ5.92mm
- Programmable:
- Yes
- Bearing:
- Three Ball Bearings
- Bearing Material:
- Metal
- Gear Material:
- Strength Steel
- Case Material:
- AL6061T6
- Certification:
- CE,FCC,RoHs
- Wire Guage:
- JR 300mm / 22AWG
- Net Weight:
- 83g(2.93oz)
- Product Size:
- 40*20*37.2mm(1.57*0.79*1.46in)
ByMongrelFriday, 01 January 2021
Servo and arm fits perfect into Traxxas TRX4 rock crawler. Look up in the forums on how to switch servo direction if needed. Plenty strong enough for my stock TRX4.
BySeannaneySaturday, 12 December 2020
Seems like a nice servo for 1/10 scale nitro RC truck. Very strong, durability seems OK so far.
