Your cart is currently empty..
AGFRC
Special Offer - 20KG Medium Aluminum Standard Size Metal Gears Digital Coreless Servo For RC Car (B53CLM-B)
Special Offer - 20KG Medium Aluminum Standard Size Metal Gears LV Digital Coreless Servo For RC Car Robot (B53CLM-B)
Note (Please read below tips carefully before order.)
1) Please kindly note that the special offer servos comes with a little flaw such as bad lasered, appearance defects, old version etc., but all the servos in the Special Offer list can work properly, 100% test before leaving our factory. If you care about the bad lasered, appearance defects, or old version etc., please do not order it.
2) As the servos in the Special Offer list is very low cost, so all the servos in this list will not accept refund. (Of course, we will ensure the servo is 100% work when you received)
3) The servos in the Special Offer list are not available to be programmable. If you would like to have the programmable one, please choose the servo in other list.
4) Refund or After Sales Service is not acceptable for the servos in the Special Offer list.
B53CLM-B is a medium aluminum case digital servo, 25T futaba spline suitable for most of rc model parts. 53g light weight design with plastic top and bottom, good option for projects with weight limit requirements. Even this servo only can work in 1s LiPo low voltage, but it comes 20KG super high torque at 4.8V and 22KG at 6.0V. You can save more battery weight for your application. Standard size design can be used for many kinds of school education projects.
Feature
25T Spline Digital STD Servo
Medium Aluminum Case
High Quality Coreless Motor
Durable Dual Ball Bearings
More Steadily Potentiometer Angle Sensor
High Precision Metal Gears
Specification
Model Name B53CLM-B
Operating Voltage: 4.8-6.0V
Operating speed: 0.163 sec/60° @ 4.8V
Operating speed: 0.140 sec/60° @ 6.0V
Stall Torque: 20 kg-cm (278 oz-in) @ 4.8V
Stall Torque: 22 kg-cm (305 oz-in) @ 6.0V
Gear: Steel
Motor: Coreless
Size: 40*20*37.5mm (1.57 x 0.78 x 1.46 in)
Weight: 79g
Connector Wire: JR 300mm / 22AWG
- Brand:
- AGFRC
- Iterm Name:
- A80BHMF
- Signal Mode:
- Digital
- Control System:
- Pulse width modulation control
- Refresh Rate:
- 333Hz
- Neutral Position:
- 1520uS
- Dead band:
- 2 uSec
- Operating Voltage:
- 4.8V-8.4V
- Operating Travel:
- 180°±10°
- Mechanical Angle:
- 220°
- Signal Range:
- 500 to 2500 uSec
- Angle Sensor:
- Potentiometer
- Temperature:
- -15C°~ +70C°
- Programmable:
- Yes
- Horn Gear Spline:
- 25T-φ5.96mm
- Bearing:
- Three Metal Ball Bearings
- Gear Material:
- Strength Steel
- Certification:
- CE,Rosh,FCC
- Product Size:
- 30*10*35.5mm(1.18*0.39*1.40 inch)
- Wire Guage:
- TYU 300mm / 22AWG
- Net Weight:
- 79g(0.2.78oz)
xxxxxx
Related Products
-
![AGF-SPV3 USB Servo Programmer for AGFRC Programmable Servo]()
Quick View -
![Aluminum Case HV 11.4KG 0.068sec High Torque Brushless Micro Digital Steering Servo (A20BHM)]()
Quick View -
![21g 0.055sec High Speed 10.4KG Programmable Digital Brushless Steel Gear Micro Wing Servo 180° (A20BHS)]()
Quick View -
![0.08sec 7.5KG HV High Speed Programmable Digital Coreless Micro Coreless Flat Servo (A20CLS)]()
Quick View
-
![AR-30A 2-4S Lipo Brushless Motor ESC 30A Electronic Speed Controller with 5V BEC for Multicopter Fixed Wing Aircraft]()
Quick View -
![AR-40A 2-6S Lipo Brushless 40A ESC Electronic Speed Controller with 5V BEC for Fixed Wing Airplane Ddrone]()
Quick View -
![AR-20A 2-4S Lipo Brushless Helicopter Electronic Speed Controller ESC with 5V BEC for Fixed Wing Airplane]()
Quick View -
![Reliable Aluminum Case Digital 45KG Torque Brushless Programmable Steel Gear STD Servo (A81BHM)]()
Quick View
-
![0.052sec Super Speed Programmable Brushless RC Servo(A81BHP)]()
Quick View
Your cart is currently empty.