45KG High Torque Waterproof Programmable Brushless Servo (A81BHMW)

stars, based on 4reviews
100items available
Contact Us
不能存图片

AGFRC 45KG IP67-Waterproof Steering Servo High Torque Programmable Full Metal Gear Digital Brushless Servo for 1/8 1/10 RC Models, 180 Degrees (A81BHMW)


Features

  • Programmable by the AGF-SPv2 servo programmer to change the torque, speed, angle, etc.
  • The whole case is made of Aluminium, and it adopts AGFRC patented strengthen stainless steel gear.
  • Unique groove surface design for fast heat dissipation of waterproof servo, 45kg high torque, strong compatibility and sensitive response, etc.
  • Contactless magnet angle sensor for a longer using life.
  • IP67 waterproof design and waterproof rubber seals screws.


Application

  • AGFRC monster torque servo can be common use in RC climbing cars, 1:8/1:10 Buggy, RC boat, helicopter, robots, mechanical arms, and others RC model.
  • Good choice for the RC model enthusiasts who love DIY, and university professor or student who are interested in developing software for robot parts.


Stall Torque

  • 28kg-cm (375oz-in)@4.8V
  • 34kg-cm (458oz-in)@6.0V
  • 39kg-cm (528oz-in)@7.4V
  • 45kg-cm (597oz-in)@8.4V


Operating Speed

  • 0.140sec/60°@4.8V
  • 0.115sec/60°@6.0V
  • 0.100sec/60°@7.4V
  • 0.085sec/60°@8.4V


Package included


Item 1:

  • 1 x AGFRC A81BHMW Programmable Servo
  • 1 x 25T Black Metal Servo Horn
  • 1 x Accessory Kit

    • Item 2:

      • 1 x AGFRC A81BHMW Programmable Servo
      • 1 x AGF-SPV2 Servo Programmer
      • 1 x 25T Black Metal Servo Horn
      • 1 x Accessory Kit

Brand:
AGFRC
Iterm Name:
A81BHMW
Signal Mode:
Digital
Control System:
Pulse Width Modulation Control
Refresh Rate:
333Hz
Neutral Position:
1520uS
Dead band:
2 uSec
Operating Voltage:
4.8V~8.4V
Operating Travel:
180°±10°
Mechanical Angle:
No Limit
Signal Range:
500 to 2500 uSec
Angle Sensor:
Magnet Angle Sensor
Temperature:
-15C°~ +70C°
Motor Type:
Brushless
Motor Drive:
FET Drive
Horn Gear Spline:
25T-φ5.92mm
Programmable:
Yes
Bearing:
Three Ball Bearings
Bearing Material:
Metal
Gear Material:
Strength Steel
Case Material:
AL6061T6
Certification:
CE,FCC,RoHs
Product Size:
40*20*37.2mm(1.57*0.79*1.46in)
Wire Guage:
JR 300mm / 22AWG
Net Weight:
83g(2.93oz)
Recent Reviews ( 4 )
By
This was exactly the right size and so far it is holding up great. I'm not the best driver and I keep hitting stuff that destroyed the stock servo in short order. This one has been going strong now for a full 2 months, it is not the weak link in the steering gear now.
By
Brought to replace the steering servo on my Traxxas Defender it fitted very easy and the cable was plenty long enough to reach receiver, I have now brought a spare for the future as I intend taking my Trx-4 on holiday to use.
By
No problem at all moving tires in all situations so far. Since installation, only time I've had time to drive is in the rain. So 4 hrs of water and mud with zero problems . Metal arm is nice so that's one less thing to worry about. Will definiely be buying more as I upgrade my other builds
By
Servo and arm fits perfect into Traxxas TRX4 rock crawler. Look up in the forums on how to switch servo direction if needed. Plenty strong enough for my stock TRX4.
+